Minimum requirements for Standard Roller Doors

Option 1: Standard Brackets

Option 2: Notched Brackets / 30mm Guides **

* To achieve full drive-through height, you will need 17" [431mm] headroom (A) is required. On doors 8-10' high a minimum of 19" [483mm] headroom (A) required.

** Available on doors up to 9'6" [2896mm] wide. (Doors with 50mm guides require an additional 20mm Sideroom.)

30mm or 50mm guides available at no extra charge.

Minimum requirements for Mini Roller Doors

Option 1: Standard Brackets

Option 2: Notched Brackets / 30mm Guides **

* To achieve full drive-through height, you will need 13" [330mm] headroom (A) is required.

** Available on doors up to 9' 6" [2896mm] wide. (Doors with 50mm guides require an additional 20mm Sideroom.)

30mm or 50mm guides available at no extra charge.

Roller Door Plan

Additional Requirements

• The area around the opening needs to be structurally sound and strong enough to support the door.
• The surface to which the door is to be fitted should be reasonably smooth and flush although small irregularities (e.g. brick or blockwork) are acceptable.
• The lintel must be flush with the rear opening and not protruding forwards or backwards.

If your opening does not meet the listed requirements, please contact us - we probably have the answer.