| 
GDS Thermaroll combines ease of operation
and space saving practicality with all the benefits of
insulation to provide simply the best garage door.
construction
 Made
from twin wall, powder coated aluminium lathe with CFC-free
insulating polyeurethane, our door is designed to help
keep the weather and noise outside where it belongs.
The
powder coated guides are brush lined to keep the elements
out and to ensure no metal to metal contact when the door
operates.
The
reinforced bottom section incorporates a heavy duty seal
which helps the door seal on the floor to keep draughts
and debris outside.
easy operation
The
state of the art remote control unit allows you with the
simple press of a button to open your garage door without
leaving the comfort and security of your car. Press the
button when you are in the garage and the door comes down,
keeping the world and its weather outside. Powered by
the market leading Somfy operator you are ensured trouble
free operation for years to come. The added benefit of
photo beam detectors helps ensure your door does not close
on any obstruction.
security
The
security auto locking systems uses the positive force
of the operator to hold the door in the closed position.
The auto locks come complete with brush coating to ensure
minimal marking on the interior face of the door.
options
It
is possible to fit the door between the reveals by using
the 75mm guide section combined with the 90 degree back
box. As with the guide sections, the 90 degree back box
and the 45 degree front box come finished standard in
white or brown, however colour matching to standard door
colour is an added option.
fitting requirements and options
The design and operation of the Thermaroll range allows
the door to be fitted in one of many ways depending on
sideroom and headroom availability.
Face
Fixing: The door is fitted to the back of the opening
without the need for a timber frame. This allows for the
maximum drive through width and height depending on available
headroom.
Face fixing:
Exterior
Fixing: In some cases, it may be necessary to fit the
door to the outside of the garage. The Thermaroll mini
with full box system makes this possible.
Exterior fixing:
Reveal
Fixing: This option allows the door to be fitted between
the reveals maximising available space within the garage,
or for garages where there is no available sideroom. If
the roll is going to be visible from the outside, the
90 degree back box must be installed.
Reveal fixing:
|
 |
colour finishes
textured woodgrain foil finishes
thermaroll mini
Ideal
for garages with limited headroom, the thermaroll mini
allows you to fit an insulated roller door into just 250mm
of headroom, or externally if necessary.
Based
on the same principal as the thermaroll, and using the
same rolling code technology and Somfy tubular motor,
the door curtain is made up of smaller lathe sections
(55mm x 12mm) thus allowing the door to roll into a tighter
space. Even in a garage where there is no headroom at
all, the versatility of the system enables the door to
be fitted to the outside of the garage using the full
box xover option.
Available
in nine standard colour options (white, brown, burgundy,
black, dark blue, dark green, beige, teak and light teak)
and three textured woodgrain finishes (golden oak, mahogany
androsewood).
headroom requirement
The
Thermaroll requires just 300mm for door heights up to
2700mm and just 350mm for door heights up to 2850mm. Where
headroom is severely restricted, the Thermaroll mini requires
only 250mm for doors up to 2350mm.
|
